10m Electric Scissor Lift

The Skyjack SJ3226 is a narrow width battery electric scissor lift with a platform height of 8m and a working height of 10m. Typical applications include plastering and interior fit-out, mechanical and electrical works, and facilities management.

The model name denotes dimensions in feet, so it is 32 inches wide and 26 feet high. Some alternative models include the Genie GS2632, Haulotte Compact 10, JLG ES2632, and Snorkel S3226E. We can also supply a wider version which gives operatives a bit more space on the platform, take a look at the SJ4626 here.

Features

• Solid rubber, non-marking tyres (tyres are light grey)
• 0.91m extending platform/deck gives you a small amount of outreach so the scissor lift doesn't need to be driven too close to a wall you need to work on
• Delivered with a fully charged batteries, battery should last at least a full working day under normal use
• Electric power means zero emissions & quiet operation
• With a platform weight capacity of 227kg, this machine can carry two people plus tools and perhaps some smaller materials
• Narrow width of 0.81m and wheels turn at 90 degrees, effectively making it zero turn. Great for use in tight spaces

Operation

Slab scissor lifts like the SJ3226 are designed primarily for use indoors, but can be used outdoors if on relatively level, firm & smooth ground like concrete.

These machines are rented on a self drive basis.

The guardrail can be dismantled to fit through height restricted areas. With the rail installed, the stowed height is 2.13m. This can be reduced to 2.02m with the rails removed.

Forklift pockets and lifting lugs are fitted if you need to move the scissor lift with a telehandler or crane.

The scissor lift may sound an audible alarm if it is overloaded and/or not on level ground. To reset this scissor lift, reduce weight in the basket and lower the platform to its lowest position. In some cases, you may need to use the emergency lowering bar.

Safety

The platform deck on this lift is raised and lowered with hydraulic rams. Emergency stop fitted to control box in the basket and at the base of the machine. Horn button fitted to control box allowing the operative to warn people nearby.

Note that there is a pothole protection device fitted to these machines which reduces the ground clearance to 1.3cm when the platform is raised. Take care to remove any loose debris from the ground and avoid it getting trapped under the machine.

Can be driven on a slope of up to 25% at stowed height.

To prevent the scissor lift tipping over, there is a built in tilt sensor which will stop the machine if it is at an unsafe angle.

Safety harnesses should be worn by operatives in the basket, connected to the lanyard attachment points in the cage via a short lanyard.

Charging

This Scissor Lift is charged using a 16A 110V socket, a charging lead is included in the hire. There is also a 16A 110V socket in the basket that allows corded power tools to be used by operatives working on the platform.

Should the scissor lift run out of charge too far from a charging point, there is a free-wheeling release valve which allows you to push the machine manually. In addition, an emergency lowering bar is fitted to the base of the machine.

Scissor Lift Training & Qualification

Training required to use this equipment: IPAF 3a